搜索

官方微信

网站首页    走进龙驰    产品中心    新闻资讯    使用效果    技术服务    人才招聘    招商合作    在线留言    联系我们
地址: 江西省宜春市高安市兰坊镇   电话:13879568483(营销总监杨先生)   E-mail:longchishengwu@126.com
版权所有:江西龙驰生物工程有限公司               赣ICP备12005970号-1   

手机官网

  • banner

    banner

  • banner03

    banner03

  • banner02

    banner02

浏览量

DY-G60 NO MORE NAILS GLUE

没有此类产品
我要询价
产品详细介绍

1. Properties

DEYI NO MORE NAILS GLUE is characterized with strong adhesion, high strength. It is flexible, not brittle, unsinkable, fillable, and paintable, weatherable, water proof. It is also non-toxic, low odor and eco-friendly, free of toluene and meets the standards of GB18583.
 
2. Applications

DEYI NO MORE NAILS GLUE is so high in viscosity that it can function as nails. Without drilling holes, it can bond timber, plasterboard, medium-density fiberboard, stone, cement, tile, metal, plastic, and rubber.

 
3. Directions

1.The surfaces to be bonded should be clean, free from dust, grease or oil. 2.Cut an opening in the mouth of the tube, matched with the attached plastic pipe. Then squeeze the adhesive out with a sealant Gun.

 

Method 1 (applicable for light objects and the bonding part bearing weak force): Coat one part to be bonded with several "zigzag" patterns at the intervals of 40 cm. Push the part with adhesive toward the other and then remove it so that there is an opening between them for the solvent to volatilize. Wait for 2-5 minutes and then compress the two parts against each other. 

 

Method 2 (applicable for heavy objects): Coat one part to be bonded with several "zigzag" patterns at the intervals of 40 cm. Clamp or screw the two parts together until the glue dries (in about 24 hours). Then remove the clamp or the screw. The bonded parts can be adjusted if necessary in 20 minutes. the initial curing time is 24 hours and the adhesive will work and reaches its best effects in 48hours.

 

4. Storage & Warnings

     Storage:

  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.  

     Warnings:

  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

 

5. Parameters

Color

Viscosity
(CPS/25℃)

Mixing Ratio 

Work Time(25℃/100g)

Cure Time
(25℃/100g) 

Tensile Strength
(Mpa)

Heat Resistance
(℃)

Shelf Life
(25℃)

Porcelain White/Beige

Paste Colloid

---

20 Minutes

Touch dry:
24 hrs

2.00

-60 to +100

18 months

Full cure:
48 hrs

 

未找到相应参数组,请于后台属性模板中添加
暂未实现,敬请期待
暂未实现,敬请期待
关键词
上一篇
下一篇