搜索

官方微信

网站首页    走进龙驰    产品中心    新闻资讯    使用效果    技术服务    人才招聘    招商合作    在线留言    联系我们
地址: 江西省宜春市高安市兰坊镇   电话:13879568483(营销总监杨先生)   E-mail:longchishengwu@126.com
版权所有:江西龙驰生物工程有限公司               赣ICP备12005970号-1   

手机官网

  • banner

    banner

  • banner03

    banner03

  • banner02

    banner02

浏览量

DY-E506 60-MINUTE CLEAR EPOXY RESIN AB ADHESIVE

没有此类产品
我要询价
产品详细介绍
1. Properties
DY-E506 60-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is a two-component adhesive with the characteristics of low odour, eco-friendly, non-toxic and good insulation, resistance to oil, water, acid and alkali, and high bonding strength.
 
2. Applications
DY-E506 60-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is suitable for LED lightings, mechanical equipment, instruments and meters, electronic appliances, and medical equipment. It is used to self -bond or inter-bond ceramics, glass, metal, and plastic.
 
3. Directions
  • Surfaces of the substrates must be cleaned, and dried.
  • Mix components A and B at the ratio of 1∶1 in weight.  Initial cure can be reached within 60 minutes (25℃), and the bonded materials can be used after 24 hours.
  • After the materials are bonded, mechanical treatment is needed to meet the the bonding requirements so as not to affect its effect.
  • The adhesive is a bit viscous, which is normal and does not affect the bonding effect.
 
4. Storage & Warnings
 Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.  
 Warnings:
  • The adhesive is irritable to skin and eyes. 
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
  •  
5. Parameters

Color

Viscosity
(CPS/25℃)

Mixing Ratio

Work Time(25℃/100g)

Cure Time
(25℃/100g)

Tensile Shear Strength
(St-St)

Heat Resistance
(℃)

Shelf Life
(25℃)

A:Clear

A:10000-15000

1:1

30 Minutes

Touch dry:
60 minutes

≥15 Mpa

-60 to +150

12 months

B:Clear

B:10000-15000

Full Cure:
12 hours

 

未找到相应参数组,请于后台属性模板中添加
暂未实现,敬请期待
暂未实现,敬请期待
关键词
上一篇
下一篇