浏览量:
DY-E501 5-MINUTE CLEAR EPOXY RESIN AB ADHESIVE
我要询价
产品详细介绍
1. Properties
DY-E501 5-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is a two-component adhesive with the characteristics of low odour, eco-friendly, non-toxic and good insulation, super high strength, and resistance to oil, water, acid and alkali.
2. Applications
DY-E501 5-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is applicable to jewelry, electronic appliances, medical equipment, and fitness equipment. It is used to self -bond or inter-bond metal, glass, jade, crystal, plastic and ceramics.
3. Directions
- Surfaces of the substrates must be cleaned, and dried.
- Mix components A and B at the ratio of 1∶1 in weight. Initial cure can be reached within 5 minutes (25℃), and the bonded materials can be used after 12 hours.
- After the materials are bonded, mechanical treatment is needed to meet the the bonding requirements so as not to affect its effect.
- The adhesive is a bit viscous, which is normal and does not affect the bonding effect.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
5. Parameters
Color |
Viscosity |
Mixing Ratio |
Work Time(25℃/100g) |
Cure Time |
Tensile Shear Strength |
Heat Resistance |
Shelf Life |
A:Clear |
A:10000-15000 |
1:1 |
5 Minutes |
Touch dry: |
≥8 Mpa |
-60 to +100 |
12 months |
B:Clear |
B:10000-15000 |
Full Cure: |
关键词
上一篇
无
无
下一篇