搜索

官方微信

网站首页    走进龙驰    产品中心    新闻资讯    使用效果    技术服务    人才招聘    招商合作    在线留言    联系我们
地址: 江西省宜春市高安市兰坊镇   电话:13879568483(营销总监杨先生)   E-mail:longchishengwu@126.com
版权所有:江西龙驰生物工程有限公司               赣ICP备12005970号-1   

手机官网

  • banner

    banner

  • banner03

    banner03

  • banner02

    banner02

浏览量

DY-G40 STRUCTURAL STEEL ADHESIVE

没有此类产品
我要询价
产品详细介绍
1. Properties
  • High adhesion strength, especially for steel-steel and steel-concrete bonding, high lap shear strength
  • Excellent stiffness, peel strength and impact resistance. It can be used to strengthen bridge under dynamic load.
  • Anti-aging, durability, weatherability and corrosion resistance to acid, alkali and water
  • It has clearly thixotropic property, non-toxic and environmental-friendly, low curing shrinkage rate
  • Easy operation. No flowing during vertical and overhead operation.
 
2. Applications
This steel structural adhesive is a two-component epoxy modified structural adhesive. It is suitable for strengthening reinforced concrete by bonding steel plate to concrete (if steel plate is in big size or its thickness >= 5mm, it is suggested to use adhesive filling method to strengthen the concrete.). In civil engineering, it can be used to bond metal, non-metal and polymer materials. In addition, it can be used to bond and fix steel bars, screws, equipment foundations and support pads of bridge beams. In household, it can be used in decoration, chandelier, housing plug and water-proof.
 
3. Directions
  • Mix part A and part B at the ratio of 1:1 evenly.
  • Polish the concrete surface until new concrete fracture appears. Polish steel till it is rough enough. Clean oil contaminants with acetone.
  • Adjust the mixing ratio according to the conditions of construction site, and temperature. Pre-test is necessary to determine its proper mixing ratio.
 
4. Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition. 
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

 

5. Parameters

Color

Viscosity
(CPS/25℃)

Mixing Ratio 

Work Time(25℃/100g)

Cure Time
(25℃/100g) 

Shear Strength
(St-St)

Compressive Stength

Tensile Strength

Heat Resistance
(℃)

Shelf Life
(25℃)

A: Grey

A:20000-40000

1:1

40-60mins

Touch dry:
2-hrs

≥16 Mpa

≥70

≥30

-60 to +100

24 months

B: Brown

A:20000-40000

Full Cure:
48hrs

未找到相应参数组,请于后台属性模板中添加
暂未实现,敬请期待
暂未实现,敬请期待
关键词
上一篇
下一篇