DY-G50 STRUCTURAL CARBON FIBER ADHESIVE

我要询价

产品详细介绍

1. Properties

High adhesion strength. It can quickly diffuse into the gap between carbon fibers and has therefore very good wetting ability in concrete and carbon fiber. It is suitable for different kinds of carbon fibers.
Anti-aging, durability, weatherability and corrosion resistance to acid, alkali, salt and chemical solutions.
High stiffness, impact resistance and great bending strength
It is a thixotropic fluid with no flowing. Therefore, it can be operated vertically and overhead as well.
It is volatile solvent free and can cure at room temperature. It is also non-toxic, environmental friendly, and can be easily operated.

2. Applications

DY-G50 is a two-component epoxy modified structural adhesive. It is suitable for strengthening external structures like concrete beams, plates, columns and construction engineering. In addition, it can help to bond carbon fiber onto concrete, brick and wood structures.

3. Directions

Mix part A and part B at the ratio of 2:1 evenly.
Polish the concrete surface until new concrete fracture appears, and then clean the surface thoroughly.
Apply primer onto the new concrete surface.
Smoothen the surface with leveling adhesive after the primer dries.
Apply adhesive and keep the adhesive thickness at around 3-5 mm.
Roll and press the adhesive repeatedly in one direction for the adhesive to diffuse better into the gap between carbon fibers.
Warning: Because carbon fiber is electrically conductive, it must be far away from electric power and equipment during operation. Pay special attention to safety while dealing with electricity.

4. Storage & Warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

The adhesive is irritable to skin and eyes.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

5. Parameters

Color	Viscosity (CPS/25℃)	Mixing Ratio	Work Time(25℃/100g)	Cure Time (25℃/100g)	Shear Strength (St-St)	Compressive Stength	Tensile Strength	Heat Resistance (℃)	Shelf Life (25℃)
A: Grey	A:20000-40000	2:1	2hrs	Touch dry: 2-4 hrs	≥18.2 Mpa	≥75.1	≥46.4	-60 to +100	24 months
B: Brown	A:20000-40000			Full Cure: 72hrs

关键词

无